Structural engineering from foundation to frame.

We deliver safe, efficient and enduring structural solutions, grounded in sound engineering judgment and close collaboration with owners, architects and builders.

Novum Engineering PLLC, Consulting Structural Engineers

Interactive load path diagram A five-story frame on column lines A to D. A point load on the roof is shared between the two nearest columns in proportion to its position, and the shares are traced down to the footings. A B C D P Roof Bracing Beam Grade Column Footings

Grid B carries 67%, grid C 33%

Services

Novum Engineering PLLC provides the following professional engineering services.

Construction sequence drawing A section through an urban lot next to an existing building. The drawing changes with each stage: condition survey of the neighbor, underpinning of its footing in lifts, soldier piles and a raker supporting the excavation, a mat foundation on micropiles, and a new steel frame with a braced bay. Illustration only. A B C D Existing building Existing conditions survey Crack mapping and monitoring Footing probe at party wall Underpinning Pit sequence along the wall, in elevation ABC ABC ABC Excavation in lifts Soldier piles and lagging Raker Utility Mat foundation Micropiles Steel frame with braced bay 1 2 3 4 5
Illustrative section, not a specific project.
  1. Stage 1 of 5

    Structural Evaluation Reports

    Evaluation of existing structures by visual inspection and probe investigation, including assessment of framing members, connections, bearing walls and foundations, identification of distress and deterioration, and load capacity analysis. Reports document observed conditions, structural adequacy and recommended remedial measures, and are signed and sealed by a New York State licensed Professional Engineer.

    Scope includes

    • Existing conditions surveys and probe investigations
    • Load capacity and code compliance evaluations
    • Remedial recommendations and repair details
  2. Stage 2 of 5

    Underpinning

    Design of underpinning for existing foundations where adjacent excavation extends below their bearing elevation. Designs establish underpinning pier geometry, bearing verification, lateral stability of the underpinned wall, pit sequencing and drypacking, together with monitoring requirements for the adjoining structure.

    Scope includes

    • Underpinning plans, sections and pit sequencing
    • Bearing, sliding and overturning calculations
    • Instrumentation and monitoring requirements
  3. Stage 3 of 5

    Support of Excavation

    Design of temporary and permanent earth retention systems, including soldier pile and lagging, sheet piling, walers, rakers and cross-lot struts, for lateral earth, hydrostatic and surcharge pressures. Designs incorporate the excavation and bracing sequence and the protection of adjoining buildings, streets and utilities.

    Scope includes

    • Earth retention design and calculations
    • Excavation staging, bracing and removal sequence
    • Support of excavation drawings for permit and construction
  4. Stage 4 of 5

    Foundation Design

    Design of shallow and deep foundation systems, including spread and combined footings, mat foundations, grade beams, piles and micropiles, based on the geotechnical recommendations, allowable bearing pressures and structural load demands.

    Scope includes

    • Spread footings, combined footings and mat foundations
    • Pile and micropile foundations
    • Foundation walls, retaining walls and grade beams
  5. Stage 5 of 5

    Structural Design

    Structural analysis and design of new buildings, vertical and horizontal additions and alterations to existing structures in structural steel, reinforced concrete, masonry and wood, including gravity and lateral load-resisting systems.

    Scope includes

    • Gravity and lateral system analysis and design
    • Framing plans, sections, details and specifications
    • Signed and sealed construction documents

About the firm

Novum Engineering PLLC is a consulting structural engineering firm based in Brooklyn, New York, providing structural design, foundation engineering and structural evaluation services for new and existing buildings.

The firm serves property owners, architects, developers and contractors, with particular experience in underpinning, support of excavation and construction adjacent to existing structures.

Existing Conditions Assessment

Design is preceded by field verification of existing framing, foundations and adjoining structures to establish load paths, member sizes, material properties and bearing conditions.

Code-Compliant Design

Structures are analyzed and designed in accordance with the governing building code and referenced standards, including ASCE 7, ACI 318 and AISC 360.

Constructability and Sequencing

Temporary conditions, construction sequencing and stability during construction are addressed in the construction documents and coordinated with the contractor.

Professional Responsibility

Drawings, calculations and reports are issued signed and sealed by a New York State licensed Professional Engineer.

Firm
Novum Engineering PLLC
Entity
New York professional service limited liability company
Engineering
Led by a New York State licensed Professional Engineer
Office
62 Saint Marks Ave, Brooklyn, NY 11217
Clients
Owners, architects, developers and contractors
Email
[email protected]

Start an inquiry

Select the services required and provide project details. A message will be prepared for you to review and send from your email.

What do you need?
When do you need it?

Or contact us directly at [email protected]
Novum Engineering PLLC, 62 Saint Marks Ave, Brooklyn, NY 11217